People are buying.Stainless steel bellowsWhen paying special attention to the overall performance, stainless steel bellows are meeting people's requirements. The integrity of the stainless steel bellows is very high, and it is difficult to corrode and leak under acid and alkali conditions. In addition, the toughness and strength of the stainless steel bellows are also very good. There is no deformation or fracture in the depths of the ground, and the probability of accidents is much smaller.

We know that the weight of the bellows is large, and the difficulties in the construction process are even greater. Stainless steel bellows effectively avoid this phenomenon. Its texture is so light that even a long pipe length can be easily lifted by two people. Stainless steel bellows are mostly used in natural gas pipelines. Therefore, the conditions for the selection of metal bellows specified in the system (entire device) or subsystem (component) are the main basis for the design and selection of bellows. This material is not easy to rust or corrode under any circumstances, and can well ensure the sealing of the bellows. It is a place that people pay attention. Most of the places that need to use the bellows are in a bad environment, so there are many choices of stainless steel bellows. With the expansion of the scope of use of the wind box, the problem of the wind box is gradually increasing. Stainless steel bellows actually in choiceStainless steel bellowsWhen paying attention to the quality situation, the market share of stainless steel bellows with good quality is often very high. Stainless steel bellows are widely loved by people, and their good quality is an important reason. Stainless steel corrugated pipe has great advantages in material compared with corrugated pipe of other materials.

One of the stainless steel wrinkle compensators is a stainless steel wrinkle hose, which is a crystal type that can change various shapes to adapt to certain special environments. In fact, this kind of hose is called a hose because the material contains rubber, and it is believed that the flexibility of stainless steel is not good rubber.

Stainless steel bellows is a flexible component with excellent performance in modern industrial pipelines. The structure is a stainless steel corrugated pipe with one or more steel wires or steel mesh sleeves, and both ends are equipped with connectors or flange heads for transmitting various media.

Its characteristics: corrosion resistance, resistance, low temperature (-196~420), light weight, small size, good flexibility.

　　Stainless steel bellowsWhat is the main use?

1. Transport corrosive chemical medium or organic solvent. (e. g. nitrogen)

2, transport high temperature gas, high temperature oil and other high temperature medium; (such as hot steam, heat conduction oil, etc.)

3, low temperature or low temperature medium transfer; (such as liquid nitrogen)

4. Transport of water, gasoline and other media in high temperature environment; (such as steam system and hydraulic system of steelmaking, coking and continuous casting equipment)

5. Pipes that need shock absorption or noise reduction. (For example, the inlet and outlet of the pump) The reason why the stainless steel wrinkle compensator cannot replace the stainless steel wrinkle hose is that the hose can be used as a pipe, and the long-distance compensation can only replace the hose.

The above is the main use of stainless steel bellows introduced.